Close the valve change from Standard to Model Respiratory

Want your engine cooler? Logically lubricating fluid (oil especially) will absorb heat and throw it to the wall of the machine. If the lubricating liquid cooled, automatic engine to cool. The easiest way is to make additional oil breathing holes. This hole can be in place on top of the valve cap.
The ingredients:
1 Valve used tires

This tire nipple can be asked in a free tire repairman origin given, or just buy used tires. 

2 Close the valve is still good (new is fine)

tutup klep baru

3 Hose LPG gas or other heat-resistant hose
The steps make it easy anyway:
1 Scissors nipple whole scrap tires and waste rubber stuck. Nipple in discarded.

2 Drill the valve cap with a nipple se tire size used.
3 Attach the meeting and give a little glue G

4 Replace the header block to give the engine and hose.

But this way or by buying close the valve variations will keep bumping into the carburetor. Usually muzzle carburetor must be deflected. Money going out to buy the manifold variations.

the final result

Close the valve pagoda

Close the valve SPS