Withy Per Clutch with Ring

Withy per clutch is a long way to increase the acceleration applied to the motor. The purpose of these ways to further reduce per clutch plate friction linings to her. As a result, the acceleration will be stronger with increasing spin machine. However, if we use this way, then we have to sacrifice comfort gearshift. The gearshift will feel heavy as per the stronger press. Here's how to rebound per clutch with ring:
1 Prepare the appropriate ring per diameter per clutch.
Provide 4 pieces or adjust the amount per existing on your bike.

2 Remove the first kickstarter.
Separated by using a key 10.

3 Open the clutch bolts with lock T8 but not released before
If we open immediately, the oil will come out ahead because we have not issued oil from the engine.

4 Prepare a container under the clutch
These containers will be the place we are going to remove the oil. Remove the bolts and gently pull the clutch, which is essential oil was able to get out.

5. Open bath clutch.
Once the oil has been out all our new clutch pull tub. When open do not be rude! Left hand while pressing the kickstarter shaft and pull the right hand clutch. If the kickstarter off we'll have to put it back in its holder and this adds to our work.

6 Open 4 bolts per her.
Open pernya 4 bolts with lock 8.

5. Slip ring per ring bolts between the per clutch.
Attach the ring near the head of the bolt.

6. Replace all