 |
| measure the outside diameter boring |
Measure the outside diameter of the Suzuki Smash boring. Finally, the data obtained that the outer diameter of the bore Suzuki Smash is at 60.6 mm. If observed, bore up Suzuki Smash maximum standard liner is 57 mm diameter piston pairs aka Thunder 125 I consider the rest of the liner is still in the tolerance limit of the thickness of the liner, which is 2 mm.
 |
| outcome measurement calipers |
Try accounted for, the results of the rest of the liner with the Suzuki Smash 125 bore up piston Thunder produces residual liner 1.8 mm. Extra care closer tolerances on the engine overheat. How to calculate it by reducing the outer diameter of the piston bore diameter and the result is divided by two his.
So do not be afraid to wear the piston to bore up Thunder 125 Suzuki Smash. Noteworthy is the deck clearance, compression ratio, the curve of the valve, and bore up care after a motor. Smash tolerable added ngibrit equipped with a 125 cc engine.
