Table Shim Gap Clearance Below Valve Satria FU

1 Clearance tappet
2 Shim used now
3 shim that should be used

Suzuki Satria FU is a new standard that pegged the gap went from 0.10 to 0.20 mm valve and exhaust from 0.26 to 030 mm. This estrangement size will change according to the age of the motor. Unless purchased the bike runs never used. Slit valve only required to be re-examined every 5,000 miles.
Satria FU valve setting instead of bolts and nuts, but the slab wedge or shim. Because of its mechanism of the valve determines the gap depends on the thick-thin shim. It also has led table use shim.
Here how to use the table.
FU original factory default, the valve gap of 0.15 mm, the size shim 1.70 mm used for in and out. When measured slit valve has been stretched and there may be a meeting, yes definitely shim has been eroded or worn by live and heat engines.
Determining the size of the shim is used next be seen in the table. In this table interval is 0.5 mm shim. It was the same as in the official Suzuki workshop should also sold complete. Its benchmark to gauge measured fuller and longer shim into place and have not been tampered with.
For example, 0.30 mm gap turned shim installed and currently numbers 170 So based on the table, should choose a size of 1.85 mm or 185 number for the valve in her. Being ex for example be 0.40 mm, the shim should be used when the current is measured using 2:00 175 installed. And so on according to the table.
That's according to a table based on the wear of all parts associated with the shim. But the live table table, please re-measured to convince. It should slit valve kembalistandar like 0.10-0,20 mm entrance slit and exhaust 0:26 to 0:30 mm.