After the carburetor settings Reamer (VM16 Skep GL100)

Reamer dengan Skep GL100

After the carburetor reamer, settings must be reset so that maximum performance and fuel remain economical. An example is the carburetor congenital Jupiter with VM16 code already in reamer skepticism GL100. What changed is the Pilot Jet, Main Jet, Suits AFR (air-fuel screw), Skep Needle, Needle Clip, and the addition of a Custom Jet Dial.

prepare materials for setting

Here's his guide:
1 and Main Jet Pilot Jet
Jetting in sets of 15/120 from its standard 15-90. Pilot and Main standard Jupiter 90 → 120, up 12 steps. Custom cutaway 3.5 mm, custom intake manifold, and needle skepticism top clip.

main jet and pilot jet Mikuni VM16

2 Skep Needle Needles & Clips
Using a standard needle skepticism Mikuni VM16SH belongs. Clips in a position right at the top.

skepticism custom GL100

3 Attach the Custom Dial Jet
Dial Jet, often referred to power the jet. Do you already know that the dial a jet?

there is a dial a jet

4 Custom Intake Manifold
Intake manifold / Neck geese already in short right and slightly tilted and jetting so much easier. Intake conditions is capable of making the composition of the fuel and the air remains thick and torque started to appear on the lap top. The motor breath so long and not run out quickly.

intake manifold looked up

5. Air-Fuel Screw 1.5 rounds
Setting the air played 1.5 rounds and obtained the highest spin machine. This setting depends on the environment so uncertain.