Check Throttle Body To Round Engine idling

No need to panic when you are averse injection motor idling. Because, despite being equipped with various sensors to read the fuel supply to the engine rotation is stable, it could be a problem comes from the mechanical components which inhibit the movement of the butterfly valve in the throttle body.
Had the case for the V-Ixion 2007 that can not be idling. And upon inspection it turns out there is a pile of carbon near the butterfly valve (Gb.1). The crust is made ​​butterfly valve action can not be completely covered, so that the air flow into the combustion chamber was not controlled. It makes high-rev engine continues. The indication, high engine temperature. Evident wear when tested diagnostic tools, engine temperature reaches 71 degrees Celsius at 978 rpm. While normally only 66 degrees centigrade at 1,150 rpm.
Cause of the large pile of carbon is usually due to poor quality fuel consumption continuously. Can of gasoline sold in the retail side of the road because it is the region away from the official retail outlets. The sticky nature of gasoline in the fuel channel and the combustion chamber so accumulate carbon (Gb.2). But that does not mean the motor can not consume fuel injection retail, especially in the regions. But that should be more intensive treatment.
One of them is by using carbon cleaner (Gb.3) regularly every 3,000 miles. The liquid serves to clear the mass of carbon in the engine and fuel lines, because I use quite entered into the gas tank. But if the already severe and erode the components, so the throttle body must be disassembled and cleaned.