The brake parts that rub against the wheel that serves as a vehicle rate freeze. Because it is a part that is rubbing, then the inevitable wear and tear parts. Up beyond use, the brake will not work optimally, then we have to replace the part. As an illustration, consider the illustration how to change the brake drum follows.
1 Remove the wheel
Remove the axle bolt, bolt caps lock brakes, brake adjusting bolt, chain adjuster and axle bushings. Loosen the chains, axles off slowly, off the brake pedal, then remove the wheel from the bike.
off the wheel of a motor |
Open the lid to remove the regular brakes.
closed along with the brake lining brake drum
|
3 Remove the canvass
Canvass stay removed from the holder. Then replace it with a new lining if it is worn.
release the brake |
Installing by using long forceps clamp / pliers for easy shark.
per brake |
Replace the brake pads to cradle cap, then clean the drum wheel before being installed. Can use a compressor to clean wind.
canvass that has been installed properly
|
Raft back to normal. Do not forget to set the brake clearances, tightness of the chain, and others.