Yamaha Byson your users and there is a little problem with the riding position because your posture is not high enough? Do not be confused and despairing. Because all the problems, there must be a solution. Take the solution by lowering the front tomorrow so that both feet can tread the asphalt to the fullest.
Previously, doi prepare the required equipment, among others; Key T-10 and lock ring 14 mm. The initial step, position the mounts on the standard middle. Then loosen the 2 screws fastening the upper triangle (left and right) keys to use T-10 (Fig.1). Continued loosen 2 screws fastening the lower triangle (left and right) keys wear ring 14 mm (Fig.2).
If it is, just measure how many centimeters tube snobs who would be lowered. Adjusted only with your posture. Tube snobs can just drop a maximum of 4.5 cm (Fig.3), more than that can not be, because fixed handlebars. If you want more, the application must raiser (improvement) in order to position handlebar handlebar height added.
Need to watch too, should decrease lest ass tube 4.5 cm (fixed) (Fig.4), the effect is the license plate holder and headlamp tight with the front fender.
When the position has been fitted to the taste, the lower and upper triangular bolts in back again as before.
