Make Skep Tube / Piston Valve

Finding parts for the aftermarket carburetor was tricky, especially skepticism which most often have oversized. Why so often? Naturally, if the carburetor is always open filter using / not using box filters, so dust / sand easily inhaled and skepticism attached to the tube so that the tube easily scratched. If you have this carburetor is usually the maximum defunct as its setting is changed, the engine is not smooth like most gasoline, hard idling, etc..
In fact, his part-kit has been widely circulated, but generally we have to buy a package of spare-kit and the price is equal to the price of 1 piece carburetor that Kw Series. For that, try some of the following solutions that may have been common for some people.

This time we will try to make the tube Skep Carburator PE Series for 28th Venturi Materials needed are:
1 As king Rx Sock Used 30mm diameter (according to the Standard Tube Diameter Pe Skep Carbu 28 Series) and
2 Albronce

As Shock Front RX-King and Albronce

As the advantages of using material from this shock because of its strong material to friction so it is not easily ingested and heavy weight help close the gas so much faster. Better yet, if you use the stuff used to be looking at a used auto parts Junkman or if you want to be cheap.

The process steps:
1 Cut Sock As with Height Adjust front Skep original tube.

As Shock which has been in pieces

2 Make a coin with thickness of about 5mm from albronce.
Adjust the diameter with a median diameter As shock. To undertake the manufacture of this coin is we have to needed assistance turner. However, for others, we can do it yourself manually.

Albronce that created the coin

3 Incorporate coins into Pieces As Shock.
Position the coin high and low positions in accordance with the standard Skep Tube. Then drill the center of the diameter of a needle in accordance with skepticism. So that the needle skepnya not be separated from its holder, can be glued to back fastening or iron, as shown below.

Coins that have been installed in the tube skepticism

Looks up needle glued skepticism

4 Make Rope Gas Holder.
Drill on the side to adjust the gas holder strap with a picture of a big hole to be small so that the gas can strap lock. sample picture below

Gas holder strap

5. Make Line Tube Skep.
Strip tube to tube skepticism skepticism serves not move / berputar.Cara can make using a hacksaw from the top down. The depth and width are customized needs.

6 Make Gas Settings.
Cut burrs try using the tube skepticism based on the size of the original so as not to stray too far from the standard size,.

7 Creating Cutaway.
For cutaway, flatten the buttocks by using burrs with skepticism based on the size of the original tube

How the above can be applied also to the carburetor Reamer, living adjust the diameter of the tube in accordance with the desired .. If you want to get a bigger tube diameter, use another shock as its diameter is larger than the RX-King like Shock As Tiger diameter of 31mm or Scorpio 33mm. However this is only recommended for carburetor that has undergone reamer with venturi dameter greater than the standard.