Tools and materials required:
1 10000 mf 50V capacitor size 2 pieces.
2 Cables to taste (2 colors black and red)
3. electrical tape
4. Cable burn in the size of cable
5. Solder + tin taste
6 Glue fuel
7 Scissors
8 Matches
Step Work:
1 Compose a capacitor in parallel as shown below
The second parallel capacitor, connect + with + (red wire), - with - on the capacitor (black wire) using solder, do not forget the fuel cap cord or tape.
2 Charge the battery before the charger for 10 minutes
If the circuit is ready, not directly connected with the motor battery as the battery charge gets sucked. Charge the first to charge the roughly 10-minute battery charger used to wear
3 Compose with our motorcycle battery
Connect the positive pole to the positive pole of the battery CP (red wire) and the black wire we put on the negative pole of the battery.
1 10000 mf 50V capacitor size 2 pieces.
2 Cables to taste (2 colors black and red)
3. electrical tape
4. Cable burn in the size of cable
5. Solder + tin taste
6 Glue fuel
7 Scissors
8 Matches
Step Work:
1 Compose a capacitor in parallel as shown below
The second parallel capacitor, connect + with + (red wire), - with - on the capacitor (black wire) using solder, do not forget the fuel cap cord or tape.
2 Charge the battery before the charger for 10 minutes
If the circuit is ready, not directly connected with the motor battery as the battery charge gets sucked. Charge the first to charge the roughly 10-minute battery charger used to wear
Connect the positive pole to the positive pole of the battery CP (red wire) and the black wire we put on the negative pole of the battery.
