Make Your Own Turbo Cyclone

Pingin motor power can be gained without a lot of outside money and outsmart itself? Easy! Create Turbo Cyclone own. This is the explanation:
The principle works like a turbo cyclone. So the wind that enters the carburetor was made so the vortex that is more focused on one titiki. If it's like this, the system must be more perfect combustion. Approximately motor power can go up ten percent. The system is not only suitable for racing, for once daily is also good.

animation turbo cyclone

Turbo cyclone hand made can be applied to all kinds of motors, both 4 stroke and 2-stroke or a duck or a type of motor sport. With cheap capital, produce goods that are multi-use. First, maximize the induction process. Secondly, it could result in more complete combustion.
Material from the turbo cyclone could utilize waste or discarded goods. Box (blue), the fan is usually called waste computer fan, wire netting and slab zinc (gb. 1). To box or lid, can utilize goods've not useful, original size is larger than the muzzle carburetor. The shape can be round or box.
Once you found the cover material, cut wire netting and zinc plate follows the shape of the cover (Fig. 2). Try to make two layers and each lapisnya filled 7-8 pieces of wire netting, the dust does not easily let go. Zinc is useful so the holder, use bolts to attach it (gb. 3).
After cribs covered with wire netting, just plug the fan in the inverted position (Fig. 4). Reversed it means writing facing inwards or gauze. Let the fan can rotate itself when the wind slammed. So, do not need electricity.
Then plug the carburetor muzzle and utilized as a crutch holder fairing turbo cyclone this imitation. Or it could be a new holder dibikinkan, from snout covered with neat carburetor.