Many young people who love riding around on his motorcycle. No one likes speeding, there is also a love touring. But only a few who know about the machine. For example, one of the most important part is the piston. This piston can wear and scratches occur on the walls of the engine block.
Genesis piston and liner scratches very very large effect. This can lead to:
1 compression leak and power down.
2 the reduced capacity of the engine oil.
3 discharge of exhaust fumes.
4. other parts are damaged as a result of reduced oil capacity.
The reason is:
1 The use of oil for too long.
in general, the use of oil with a very long time already very dirty. This dirty oil level is too large and ease friction piston scratched.
2 Often the motor spur excessive.
if often bring the motor to engine speed is too high, it will result in a beret piston. This happens due to large friction continuously on the piston.
The solution can only take to resolve it in a way that is oversized to the maximum extent Oversize 100 enlarge the diameter of the cylinder liner diameter follow the new pistons. Ranging from oversized 25 (0.25 mm) to 100 oversized (up 1 mm) and more if his name bore-up.
To minimize damage to the piston wall, always keep the condition of oil in the crankcase. If it's time to be replaced, do not get used much less delayed until the volume is reduced from the volume of oil left by default. Then get used to warm up the engine also the first time the motor is turned on about 5 minutes. In order to lubricants which is still below can be lifted up and really rub maximum lubricate components.
Genesis piston and liner scratches very very large effect. This can lead to:
1 compression leak and power down.
2 the reduced capacity of the engine oil.
3 discharge of exhaust fumes.
4. other parts are damaged as a result of reduced oil capacity.
The reason is:
1 The use of oil for too long.
in general, the use of oil with a very long time already very dirty. This dirty oil level is too large and ease friction piston scratched.
2 Often the motor spur excessive.
if often bring the motor to engine speed is too high, it will result in a beret piston. This happens due to large friction continuously on the piston.
The solution can only take to resolve it in a way that is oversized to the maximum extent Oversize 100 enlarge the diameter of the cylinder liner diameter follow the new pistons. Ranging from oversized 25 (0.25 mm) to 100 oversized (up 1 mm) and more if his name bore-up.
To minimize damage to the piston wall, always keep the condition of oil in the crankcase. If it's time to be replaced, do not get used much less delayed until the volume is reduced from the volume of oil left by default. Then get used to warm up the engine also the first time the motor is turned on about 5 minutes. In order to lubricants which is still below can be lifted up and really rub maximum lubricate components.
