However, if the mounts unexpectedly crash when you will be turned on, it could be your motor dirty spark plugs. When this situation occurs, the thing to do is to clean the spark plugs to the ignition back to normal. Because the head is stored spark combustion impurities that cause incomplete combustion. The steps that need to be done are:
First, provide a key spark plug, then open your spark plugs.
Also provide a wire brush and gasoline. Do not clean by using sandpaper on the spark plug electrodes. Therefore, when it is done will shorten the life of the spark plug, you should clean up with a brush.
Second, clean the charcoal accumulation in the head of the spark plug.
Do not immerse plugs into gasoline, consequently spark plugs will wear out quickly and rapidly occurring impurities on the spark plug, because the spark plugs are made of ceramic elements.
Third, set the spark plug gap distance.
This depends on the type of vehicle used.
Fourth, test the ignition.
How, by putting the tip of the spark plug head start later on. If the fire flower is normal then it's good enough when cleaned.
Fifth, check the spark plug wires.
Spark plug wires also need to be examined, when it was led to the electric conductivity is reduced.
However, all of which should be taken care of on a regular basis, and do not wait until the motor broke down or fuss.
