 |
| autolube components on single cylinder |
In the picture above shows some of the parts or components that make up the oil pump Autolube in Yamaha 2 stroke. The usefulness of this is Autolube oil pump to supply oil side 2 stroke motors are measured according to engine speed and throttle opening. Given this Autolube oil pump, 2 stroke Yamaha motors no longer need to mix gasoline with oil like Vespa motor side, etc..
 |
| whole oil pump |
The oil pump was working around-the rotation of the crankshaft, or in other words, following the engine RPM. That is, the higher the engine rpm, the pump will supply more oil side. So the engine is lubricated with optimum lubrication without any symptoms of deficiency which causes overheating in the engine.
 |
| parts which must be set |
However Autolube pump that works automatically is also necessary adjustment. Set it there are 2 ways, namely from the throttle cable and bolt his plate setter. In the picture above, looks the part in question is adjusted nut and adjust the guide pulley pin. To check the results, usually calculated number of oil droplets per minute of his side. For each of the motor is not the same, so the accuracy of the mechanical needs of each.
 |
| set of wires gas |
 |
| set of plate setter |
