The series of 12 volt LED lights are intended for use in motor vehicles. The purpose of the series of 12 volt LED lights is to make the light variations of the motor vehicle that can be lit with bright and durable. LED (Light Emithing Diode) is a diode that emits light when forward biased got. LED working voltage is 3 volts DC and the maximum current that can flow in only 20 mA LEDs, therefore, for applications as light variation in motor vehicles need to be specifically arranged so that the LED can be lit with bright and durable. Here is how to install LED lights on a motor vehicle or car.
The series of 12V LED lights (9 LED)
Motor Circuit for LED combination lamps for motor above is one example that is used to assemble LED light variations on a motor vehicle. 3 pieces of LEDs are arranged in SERIES then mounted current-limiting resistor 80 Ohm. With the configuration as above with bright LED will light and durable due to the current flowing in the LED is not more than 40 mA and is divided into a network of other series of LED lights. To increase the number of LEDs can be done by creating a network such as the example of a series of LED lights for motorcycle 12V above into several units and then assemble the units set of LED's in parallel. Suppose want to assemble LED light with 21 LEDs 12V then be assembled as follows.
The series of 12V LED Lights (21 LEDs)
The series of 12V LED lights (9 LED)
The series of 12V LED Lights (21 LEDs)
For Motor With 21 LEDs assembled configuration as shown above, the LED lights on the light variations of the motor will be light and durable. Current flowing in each LED in the LED light above 12V for the motor does not exceed either 40 mA LEDs arranged in 9 or 21 LEDs. For maximum results from variations in the manufacture of motor vehicle lights with LED type LED should be used "super bright" because this type of LED can light up much brighter and ability drain currents greater than standard LEDs.
