Tips to Extend the use of the clutch lining Thin

Coupling has a minimum thickness limit to rev the engine can be forwarded properly. It can be perceived from the pull weight, wasteful of fuel, and the symptoms of the clutch slip. We recommend that you replace the clutch lining if it crossed the line minimum standard.
There are ways to extend the use of coupling that is thin (at least its too far), namely:

1. soaking it in gasoline for about an hour
Immersion process is intended that the clutch lining to thicken again. By doing this way, the use of coupling can be increased approximately 6.000km. Only coupling is harder than new condition. This method still cause symptoms of clutch slip.
2 withy per clutch with ring 2mm thick.
Actually this is a long way around the 2000's. This method aims to per clutch is able to suppress the coupling to the friction plate. As a result, the already thin coupling this will give a good performance because he was able to channel the engine rev to the friction plate. It's just the gearshift comfort will be reduced due to the rigors per clutch pressed canvas.