Installation Nokens As in in supposedly will make your bike breath and increase power. But the obstacles are often experienced is how to set it up. The following is the installation technique:
 |
| TOP camshaft position Satria FU |
The picture above is a standard pair where the camshaft timing gear indicator EX line figure 1 will be aligned with the block, the pointer will point 2 above, and the distance between the pointer number 2 EX timing and number 3 pointer on the timing gear IN is 16 eyes.
 |
| IN EX camshaft standard Satria FU |
After Nokens Standard installed as shown above, the next step is to remove the camshaft EX with no change in the timing chain camshaft position IN. Then put the new-ex timing gear (camshaft IN to EX) with a timing gear and camshaft position as follows: (This change using original holes so not to make new holes in the teeth timing)
 |
| installation Noken IN for EX Satria FU |
Once mounted on the camshaft timing gear IN the position as shown above, then install the camshaft IN EX new position with the position as shown below:
 |
| camshaft IN IN Satria FU |
