Surely you want your bike to have a clean appearance. Especially now more prevalent proliferation of virus-chrome. Keep in mind that chrome only last 2 years for the type of spray, while the type of dye is very rarely found. When compared to burnish using green stones, then the result will be very different. Now living alone way or process that can result beat shiny chrome spray.
Ingredients:
green stone
400 emery
emery 1000
kerosene
jeans fabric
ordinary cloth
Paint remover
brush
water
How:
1 Remove dirt and paint
Dirt brushed prior to peeling. Once the paint was dry and give remover (paint remover) using a brush. Be careful! Do not let the paint remover on the body as can be ascertained irritation and itching. Allow a few moments to clean the paint chipped. Repeat until the paint peeled off perfectly.
2 Sandpaper rough up the pores disappear
When the paint is chipped, started rubbing using coarse sandpaper (400 or 500 size). Keep all the pores that can arise Average each other. Make sure the gaps and corners have been sanded properly.
3 Sandpaper smooth until blended
Once the pores disappear and no part arising, further by sanding using fine sandpaper (size 1000). Blend with water until coarse sandpaper former disappears and the surface becomes flat.
4 Rub using green stone
After wrapping, green stone mixed with kerosene in the bottle. You do this by grinding smooth green stone and put in a container that has been filled with kerosene. Flatten the solution and scrub jeans using cloth or paper cement. Make sure the sound is generated from the rubbing more and more softened. If it is not sound, check whether it has been rubbed shiny results. If so, proceed to all parts to be made shiny.
5. Finishing using baby powder
After all shiny, finishing the use of a clean cloth and baby powder. Sprinkle the powder evenly and rub until the dirt using a cloth of green stone raised scars. Shiny already! Now we just care so that the result is always shiny and eye-catching bike every day.
Appendix other image.
Ingredients:
green stone
400 emery
emery 1000
kerosene
jeans fabric
ordinary cloth
Paint remover
brush
water
How:
1 Remove dirt and paint
Dirt brushed prior to peeling. Once the paint was dry and give remover (paint remover) using a brush. Be careful! Do not let the paint remover on the body as can be ascertained irritation and itching. Allow a few moments to clean the paint chipped. Repeat until the paint peeled off perfectly.
2 Sandpaper rough up the pores disappear
When the paint is chipped, started rubbing using coarse sandpaper (400 or 500 size). Keep all the pores that can arise Average each other. Make sure the gaps and corners have been sanded properly.
3 Sandpaper smooth until blended
Once the pores disappear and no part arising, further by sanding using fine sandpaper (size 1000). Blend with water until coarse sandpaper former disappears and the surface becomes flat.
4 Rub using green stone
After wrapping, green stone mixed with kerosene in the bottle. You do this by grinding smooth green stone and put in a container that has been filled with kerosene. Flatten the solution and scrub jeans using cloth or paper cement. Make sure the sound is generated from the rubbing more and more softened. If it is not sound, check whether it has been rubbed shiny results. If so, proceed to all parts to be made shiny.
5. Finishing using baby powder
After all shiny, finishing the use of a clean cloth and baby powder. Sprinkle the powder evenly and rub until the dirt using a cloth of green stone raised scars. Shiny already! Now we just care so that the result is always shiny and eye-catching bike every day.
Appendix other image.
