Have experienced a motorcycle battery soaked or dropped. But don't panic before trying to check carefully the state of your battery. The causes are certainly many of our bad habits. It's also bad if the battery is tooak, especially on motor matic. The kick starter is quite complicated because it has to be standard 2 and must come down again from the motor.
Well on this occasion we share the Causes of Soak Motor Fast Battery Aki and how to overcome. Alright, just see below.
1. Kiprok
Cause of the Fast Motor Battery Soak is the first check kiprok. Kiprok also has an important role in charging the battery, if damaged, it can be dangerous, the effect is overcharger, or vice versa, which ends up becoming soaky or overdrawn. So try to check this Kiprok if you have a problem because the voltage is below 14 volts or exceeds 15 volts when in the gas between 4,000-5,000 RPM there is indeed a problem in the Kiprok the solution must be replaced.
2. Bore-up
Next up is a massive Bore-up. Many mounts that have been bore up massively but do not pay attention to this like the spool dynamo startet does not follow the upgrade so the compression results will be high then the dynamo is not strong to be started and then forced to continue and finally the battery is the victim. So may do this but also consider other things alias impact.
3. Stop lamp
The third reason for a fast motor battery Soak is that there are many instances where the stop lamp is constantly on but the motor owner does not pay attention to it. Well if left to an electric current from the battery will be sucked continuously for the engine life. This is also the cause of soak motor battery friend. Try to check if the brake switch is broken and this should be fixed quickly.
4. HID
The fourth cause of the fast motor battery Soak is due to the replacement of the HID type lamp. This lamp is indeed brighter than the standard factory lamp, but this type of lamp requires a larger electricity supply. Lots of users do not really think about it, aka installing HID lights, but they don't adjust to the charging spool, so the battery quickly drops. Try asking for tips from experts so that the installation of HID lamps can be safe for your motorcycle battery.
5. Car horn
Cause of the Fast Motorbike Battery Soak is the last to install a car horn on his motorcycle. Indeed, many motorcycle owners often do this horn replacement on their bikes, but keep in mind as well as the HID lights of the horn of this car do require greater voltage so the battery is not easily overdrawn. It is better to add a relay to stabilize the electric current.
So this is the cause of the Soak Motor Battery Fast Soak and maybe there are still other causes. One of them that we did not discuss is the problem of continuous contact on the position but the motor does not turn on. I hope this information is helpful.
