Carburetor SupraX 125R / Kharisma installed at Honda Legenda2

Posted by

Carburetor Honda Kharisma SupraX 125 or belonging can be used to Honda Legend, Supra, and Grand. The installation was not complicated and can use its standard filter box. For the gasket between the intake manifold with carburetors stay behind the top and bottom positions. Bolt fouled thick ring that bolts are not stuck into the carburetor. Do not use the fuel hose faucet again. If it pleases just buy a new faucet manual. For gas cable, aka the sleeve must be cut cable wire cover is reduced. Approximately 2cm. Try it until the gas lever there is a distance of free play or buy a new throttle cable if eman same original.
For carburetor SupraX 125 or belonging to possess charisma TPS (throtle Position System). TPS is removed only because it will coincide with the standard filter box. If you open the filter should be installed only. Carburetor adjustment will meet around 2-2.5 rounds. The pilot jet and main jet standard (35-75) can be used. yes if you want to step down 1 of its jet pilots to 32.
To that still rely on box filter, the filter box rubber joint to be replaced with Honda's own SupraX 125R. If her standards are too small, but can be forced to scrape the rubber using a drill tune.


Blog, Updated at: 7:20 PM
Powered by Blogger.