Character and Substitution Part Roller Tensioner Honda Blade

cam chain Blade

Here there is little information about how to replace the tips tricks roller chain tensioner Blade. Tensioner on the Honda Blade 110 is still the same as long as Honda has the Honda Grand, Legend and the Supra X Tensioner roller wear 2 that are above and below the cam gear in the middle of the bottom up system uses a spring and oil pressure.
Tensioner Honda Blade is equipped with a roller made ​​of rubber. Limitation roller was just 8,000 rpm. Roller is only suitable for use for daily only, and not to race. And if the serrations on the roller should have gone to be replaced with a new roller, otherwise it is difficult to set the chain tension. Idel engine will also be reduced so that the effect is a decrease in motor power and gasoline became more extravagant. Kem also become unstable, open-close valve in the combustion chamber is also not in accordance with the Calculation normal. To replace the tensioner roller Honda Blade can use a roller got older Honda motors such as those mentioned above (Grand, Legend, Supra, etc..).