Repair Chain cam / Kamprat Honda Grand / Supra / Legend of The Noisy

sections were flattened

Model generation Honda suit camrat chain C-series still adhered to the conventional model. This model only hold up to 8000 rpm and quickly asked the chain locker. When the cam chain / camrat you've requested is no saving solutions change when a thin wallet. Ie by reducing the tensioner lever adjacent to the crankcase.
How:
1 Open the lever presneling, and tub Magnet
The key to this step requires 10 to lever presneling, T8 key to open the four screws fastening the magnet tub. No need to worry about the oil spill, because this area includes dry areas without oil.
2 Remove Magnet
Removing the magnet requires special magnet treker. Go to first use a lock fastening bolts Remove the magnet using treker 14th.
3 Remove the Starter System
Open the locking bolt, tongue retaining chain, starter gear and starter chain.
4. operation begins
Open penonjok lever / lever tensioner using key 17. To remove this part, per tensioner must be removed first. You do this by using the 14 keys, bolt on the bottom of the opening. Liver - liver per jump. Once detached, please stingy lever or using grinding. Do not need much - a lot, just until the lever is not attached to the crankcase or no clearances are 1-2 mm. Replace the lever, insert the spring and plug. Set the cam chain tension and tighten.
5. Replace all the parts.
How to reverse the above process. Once done, turn on the machine and check.