Adjusting valve construction types there are 5 types:
1 Tuners slit valve with nut and bolt
This construction is widely used in motors manufactured in Indonesia, almost all of the motor wear this setter. Its a very easy way of setting the first step sets loosen the nut fasteners and bolts to find the specified size and tighten the nut fasteners, finishes.
2 slit valve adjuster on the lever swing construction
Construction is usually applied to the car - a car made in Europe Position measurement of the gap between the valve camshaft as the swing lever is not at the end of the valve stem and the valve lever swing.
3 adjuster valve gap with a shim or plate setter
Setting this system with plate setter to change their ways (shim) with a wide - range of thickness of the shim. The advantage of adjusting shim is a model we will rarely set the valve and is widely used in the construction of high-speed motors for precision opening and closing the valve will not turn on at high speeds. Tuners models used Suzuki Satria F-150, Kawasaki Ninja 250, etc..
4. lever valve with adjusting eksenter (eccentric)
Construction tuning this model is similar to setting the chain in motocross. Setter this model is used in boxer-type engine.
5. gap adjuster valve on the motor neptune
Advantages of adjusting the valve gap is neptune motor adjustment can be done when the engine so that a more accurate life.
1 Tuners slit valve with nut and bolt
This construction is widely used in motors manufactured in Indonesia, almost all of the motor wear this setter. Its a very easy way of setting the first step sets loosen the nut fasteners and bolts to find the specified size and tighten the nut fasteners, finishes.
Construction is usually applied to the car - a car made in Europe Position measurement of the gap between the valve camshaft as the swing lever is not at the end of the valve stem and the valve lever swing.
Setting this system with plate setter to change their ways (shim) with a wide - range of thickness of the shim. The advantage of adjusting shim is a model we will rarely set the valve and is widely used in the construction of high-speed motors for precision opening and closing the valve will not turn on at high speeds. Tuners models used Suzuki Satria F-150, Kawasaki Ninja 250, etc..
Construction tuning this model is similar to setting the chain in motocross. Setter this model is used in boxer-type engine.
5. gap adjuster valve on the motor neptune
Advantages of adjusting the valve gap is neptune motor adjustment can be done when the engine so that a more accurate life.
