Many people, even young people though, want to change the size of the carburetor MJ PJ them. The goal there is only one, namely to adjust the amount of gasoline that goes into the engine. Replacement PJ MJ is the case if the motor has been in Bore Up, korter intake-exhaust, exhaust replacement, etc..
Steps to replace PJ MJ size is as follows:
1 Remove the carburetor from the holder
2 Open the 4 screws on the carburetor bowl
3 Remove the nozzle PJ / MJ, then replace it with another measure
4 Installing PJ / MJ should not be played too loud! (can lead to carburetor broke)
5. Close the bowl and return to the stand
6 Check the settings, if it does not mean PJ MJ asked in exaggerated, if the machine is less smooth, have dropped. (PJ and MJ should not reply in the locker, one also can)
Steps to replace PJ MJ size is as follows:
1 Remove the carburetor from the holder
2 Open the 4 screws on the carburetor bowl
3 Remove the nozzle PJ / MJ, then replace it with another measure
4 Installing PJ / MJ should not be played too loud! (can lead to carburetor broke)
5. Close the bowl and return to the stand
6 Check the settings, if it does not mean PJ MJ asked in exaggerated, if the machine is less smooth, have dropped. (PJ and MJ should not reply in the locker, one also can)
