The voice that emerged from the brake drum (like Fig. Below) often appear, especially during the rainy season.
this indicates we are already dirty brake / run out ..
do not rush to replace with a new one ..
we can clean it with his own hands without having to workshop ..
I use my bike, 102cc Jupiter in 2001, as an example so that readers are able to understand more clearly.
Here's how:
1 Make sure the motor we are in the middle of the buffer position, this allows the rear wheels are able to spin freely ..
2.Siapkan instrument, namely 19 Key (can wrench), 10-12 key, coarse sandpaper, and container.
3 Loosen just enough indicator
4. open the nuts and bolts securing the brake drum with key 12,
5. release clasp dr place by means of the brakes and let go.
6. open the nut with a wrench 19.
 |
| If stuck use the 14 keys on the left side and 19 on the right of his key |
8 o'clock slowly spacer that is on the right wheel, after the wheel off, take the brake lining that is inside.
9. clean the canvas with a coarse sandpaper until the slick is lost. (Not too much)
10 when it returned to the restore procedure.
11. pair of canvass to the boss and enter into the bike again ..
12. pairs of wheels in conjunction with a spacer (it can not be one at a time) and press upwards.
13. enter back into the wheel axles
15. return all the nuts and bolts.
