Installing Carburetor Rx King in New Jupiter MX

RX King VM26 carburetor

Many Yamaha Jupiter MX users are less satisfied with the vehicle speed. Carburetor is often a contributing factor. Carburetors are often accused of being the cause of the lack of pace of New Juptiter MX because it has a vacuum type.
Steps that can be taken is to use carburetor RX King. In addition to the carburetor venturi RX King by 26 mm, a good character in the lap top. In addition, the New Jupiter MX standard intake can be directly used without hassle replace it first. In contrast, if Jupiter MX long should replace the intake manifoldnya terbelih first.
However, there is a problem when installing the carburetor RX King in New Jupiter MX. Among them are the following:

1 There is a TPS (throtle Position Sensor) connected to the CDI.
In the carburetor there is no polling RX King. If using this carburetor, then the TPS sensor will work and the indicator will remain lit on the dashboard unreadable due to CDI TPS sensor. Method one - the only one that can be safely recommended is to replace the original CDI, CDI BRT uses that no longer TPS sensor. Again this is not a promotion.
2 Cable
Have to readjust the throttle cable. choke cable into non-active because the choke carburetor RX King using pull type manually.
3 Setting back spuyer
Possibility nozzle was in 17.5 / 130 (PJ / MJ). Setting up plugs or brownish red brick so that the motor can still economical.