Dial Jet works at high speed along a bottle openings skepticism. When skepticism raised, the fuel will be sucked vacuum snout carburetor, if in the run-down, power jet is not functioning. Dial task is to help supply jet fuel at high RPM.
Those who really love carburetor are some tips to make the dial a jet development without damaging the carburetor.
Step - step it:
1 Prepare Velocity stack
For example, this stack is used for the velocity carburetor 28 (in stores many variations).
The size should not be too big (just use the rest of the hose stuck in the carburetor).
3.-size pilot jet
If you can not be too big because if too large will reduce the work function. For example, I use a 38 pilot jet belonging Mikuni carburetor Mikuni FU because the pilot jet has a threaded under and has a smaller diameter than the output Keihin carburetor pilot jet.
Punch a hole through the top of the back of the drill bit ± 3mm & in Senai (threaded tap) and replace the pilot jet was on an existing screw holes in velocity stack. Post a velocity stack on the carburetor and connect one end of the hose into the pilot jet and the other end of the pipe connected to the gas dumps under the carburetor bowl. The last step to open the drain screw out of petrol (open to taste and not to loose).
 |
| This is it, PE 28 with Dial Jet Adjustable |
