If you want to check the condition of the spark plug and cleaning it from the rest of the carbon crust, we must remove the spark plugs from the engine. His manner is easy and simple really. Just need a bit of force alone. Her steps as follows:
1 Open Cover spark plug / spark plug Cop.
The trick just stay unplugged it.
2 Prepare Spark Plug and Play Opposite Lock Clockwise.
The key plugs are usually obtained after we bought the bike. Or use the key spark that his head is not flexible so that the nut plugs slek.
3 Here Sightings Spark Plugs After Release.
Clean the spark plug with a wire brush. If sanding electrode spark plugs, can lead to wear and tear because the surface is getting thinner.
4 Put It Back After Sparkplug Cleaned.
Attach the first hand to fit bolts and nuts are not slek. After nearly tight, tighten it.
5. Put Back Cover spark plug / spark plug Cop.
1 Open Cover spark plug / spark plug Cop.
The trick just stay unplugged it.
The key plugs are usually obtained after we bought the bike. Or use the key spark that his head is not flexible so that the nut plugs slek.
Clean the spark plug with a wire brush. If sanding electrode spark plugs, can lead to wear and tear because the surface is getting thinner.
4 Put It Back After Sparkplug Cleaned.
Attach the first hand to fit bolts and nuts are not slek. After nearly tight, tighten it.
 |
| New spark plugs turn half round whereas the fourth round plugs for maintenance only |
