Salah Satu Penyebab Mio Bergetar

Yamaha Mio complained vibrate when climbing or accelerating suddenly. Anyway trembled. Depart from rest with large rpm same symptoms will appear. On the flat roads in a constant speed that is lost. Average matic Mio aged three years and above will be so. For other automatic also experienced the same thing.
The symptoms are not due to engine trouble caused, arising from the CVT but his. Furthermore, let's try to look at the part that serves as the engine speed control is passed to the rear wheels of this. In this section there are two, namely primary and secondary pulleys. There is a mechanism on the primary roller while the secondary pulley components are centrifugal clutch and torque cam.
Vibrations that occur due to lack of lubrication torque cam and will eventually wear out. It was rarely treated region. Usually when a routine service, disassemble and perform lazy lubrication.
Before it's too late, take care to prevent it, just wear fat. However, should further remove the CVT cover off centrifugal clutch is also connected to the secondary pulley shaft. Location of cam torque at the centrifugal clutch for the first centrifugal clutch must be removed.
Be careful when going to remove the centrifugal clutch lining, there is a strong spring. Once everything is off, new look sliding sheave where the torque cam located. To provide lubrication, seal the lid open. Note also the condition of the sill, if it had been torn mandatory change. This seals to withstand lubricants.