Simple Ways to Overcome Carburetor Attended water

there are deposits of water in the bottom of the carburetor bowl

Take in water tank is already a pretty classic problem, especially during the rainy season. There are several factors that cause water can enter the tank until it goes into the carburetor and cause the engine would not start. Starting from when washing the motor caused by spraying or rain.
The fix is quite simple, the first step is closing the gas tap in the tank towards the carburetor, then loosen the drain screw on the carburetor gasoline. Let the remaining gasoline in the carburetor wasted exhausted, because there is the possibility of gasoline in the carburetor has been mixed with water.
If the water in the carburetor is completely drained, then tighten the screw cap or the drain and opened the back of the tank to the carburetor faucet, followed by turning on the motor. But keep in mind, when using the kick starter should turn on and do not use the electric starter.
But if the motor still wrote would not start, it is possible that the motor plugs pematikan tainted water so that the flame failure occurs. So loose spark plugs, spark plugs continue to dry using a dry cloth until it is completely clean and dry.
After that, the spark plug hole stuffed with a dry cloth, motorcycle kick starter several times in a state machine dies or the ignition is off. The final step is to reinstall the spark plug, but make sure there is no water in the head or in the spark plugs. Then turn the motor with the kick starter.