Substitution Tips Accumulator

Replacing the battery should any model, from the kind of wet, dry up lithium. When the wet-type battery, water is required to frequently check. When a maintenance free dry type, as well as with lithium, they're expensive. Replace the battery should pay attention to the motor voltage and current. Voltage can be the same, but no less important is the successor amperes. Amperage should be equal to the amperage on the previous battery.
There is no ban on wearing the amperage is too big or too small, the motor is also still alive. But it does not fit a standard charging regulator motors. That do not fit, usually lack or over-charge batteries make charging supply could erupt.
Comparison between the battery and charging regulators generally allowed 10%. That is if the battery 10Ah, the charging current should be below 10% (1 ampere) and must not exceed. 10% is to anticipate in order to avoid over-charge. If the change to a larger spool then have to change the filling to suit the needs of the battery.
At no regulator diode component name. This diode is a determinant of the large or small charging current. Diode is what controls the charging current. This is the case because each diode that has a size that is different. Different plants also different regulatory circuits. So do not just choose the battery, select the same amperage as the original. If it should be different amperenya, should only be raised a maximum of only one digit of the standard size.