Tips to Increase Acceleration Motor

the motor must have its best acceleration

People often talk about the pull / acceleration motors they use. Among them, there are people who complain of motor standstill, acceleration is less, up to a maximum of less assume their motors. Here are tips for the motor you can run faster.
1 Wash your Motorcycle,
Gross motor that will make the dirt obstructing the outer part of the machine (eg a chain, sprocket / gear, etc..). If the motor is clean, then the motor will have more acceleration due to the lack of friction.
2 Check the Tire Pressure Wind,
Motorcycle tire that has less wind will make the acceleration decreases. Why? because tire grip will be greater but not distribute engine power to the wheels. If the excess pressure would be dangerous because it can explode at any time. Pressure that fit the spec tire will give more acceleration and driving safety.
3 Give lubricant or liquid Chain oil into Moderation,
The chain will dry easily broken because of the absence / lack of space the chain movement. Sometimes, the chain can not turn as it passes through the gear / sprocket. If the chain lubrication fitting given, will give good acceleration, because the chain is able to convey rev the engine to the wheels. However please note, do not give excessive lubrication, due to splashes into the back and the other riders. In addition, the lubrication will be attached to the wheels and sheer wastage occurs.

4 Routine oil change every 3 months, or every 2000-4000 miles,
Viscous engine oil will provide good lubrication, but less acceleration. Dilute the oil will give good acceleration, but mandatory change every 1000-2000 miles away. Routine oil in the dressing will give a good performance of the engine, the engine does not heat up quickly, and the maximum acceleration in the appeal which rarely change the oil. Enter the appropriate dose needed machines that page.
5. Remove the air filter without removing Box Filter,
loose paper / foam air filters that allow air to enter the engine more. This will result in poorer fuel / economical entry into the engine. Reset by setting the idling back or no need to set again because it is quite true.
Modification 6, from 1-5 is no simple matter.
Starting from here is up to middle stages of modification. To be responsive acceleration, parts that can be replaced are: unlimiter CDI, racing coil, spark plug platinum / Iridium, the larger venturi carburetor, ignition timing change, Roller, Korek machines, Bore up, Stroke Up, ported Intake-Exhaust, freeflow exhaust, etc. .