And second, indirectly this has become the owner of the motor pattern of self care, to extend the life of the motor starter coil spool, brush and connectors so as not flammable.
But to get a good mechanical double starter, so not too long squeeze double starter switch must be supported by some aspects of the other components. What should be considered?
1.High carburetor float & hygiene
Create motors are still carrying vessel type float, float high note. Do not let the floods, because the quality of burning so much concentrated and harder to start the engine when operating a double starter. Thus this context that led to a double squeeze duration starter made longer.
Routine of cleaning the inside of the carburetor, this treatment is also quite complex, the effect of the double mechanical starter. Therefore, when there is a chance the pilot jet crust, often times be a trigger. Because, this leads to a more concentrated mixture of fresh gas and causes the starter double squeeze so much longer.
2 Note the rubber elasticity vacuum
Especially for motorcycle or scooter that uses a vacuum type carburetor, note the degree of elasticity of the rubber vacuum. Because, if harsh response profile changed upliftment needle skepticism so more slowly. Mechanically carburetor, fresh gas mixture generated so much poor or dry.
3 Clean the double automatic starter
For this type of scooter, double automatic starter is coupled with the front of the rear brake lever should have a pretty good treatment. Especially, clean-up crust and used lubricants in this section. In order to automatically double the starter connector can be disconnected and connect responsive pass electric current from the ignition. To support the use of double starter remains smooth.
It thus also valid for the type of motor sport. But, if in sport, automatic double clutch lever starter located on the left side. Treatment is also the same pattern with double automatic starter scooter.
