HHO For Fuel Consumption Saving Motor

HHO installation scheme

There are many kinds of fuel savings. HHO itself is similar to the HCS, only HHO requires HCS requires electricity and hot heat. HHO and HCS together - each aiming to form a hydrogen molecule as an additional fuel. However, HHO is slightly smaller than the level of its efficiency because the HCS requires electric voltage and large currents for the production of hydrogen gas which is equivalent to the HCS.
HHO efficiency level of about 53% from the current supply is large enough. How to make it as simple her with HCS. Materials needed are:
1 plate anode - cathode of stainless steel (eg, spoon / fork steel)
2.-modified heat-resistant container
3 Cable
4. 12V as indicator lights
5. Hose
6 Intake manifold modif
7 Pure water (distilled water or water battery)
Simply a way of making it:
1 Modif container
The container is a hole on the top and bottom of the container. The top is a hole for the pipe as shown above. At the bottom was given a steel plate that will be the anode cathode. Close the iron with glue or silicone glue to shoot meeting.
2 Stringing cable
Wires strung together like the picture above. Cables should have 2 different colors. For positive should give a red color and connect to the motor kiprok +. Negative cable wires should be black like mass and connected to kiprok -. In the red wire for the indicator lights give a voltage of 12V because kiprok around 12-15V for battery charging.
3 Intake modif
Dimodif intake manifold with an additional channel for the given input channel HHO. Connect the hose heat resistant to hydrogen does not leak. To give one-way safety valve before entering the intake manifold. To set the hydrogen gas that goes, give a one-way valve faucet before.
4. work HHO Test
Make sure the container lid has a meeting. Fill with distilled water. Turn on the motor. If it bubbles, you have successfully HHO. Reset the carburetor after the hydrogen gas is formed.