HAVE you when using the kick starter on your motorcycle? HAVE experienced events that kick starter can not be returned to its original position? Please check the nut fastening the kick starter. If tight and do not wear out, it is certain that an error occurred in the inside of the machine.
Usually the cause of his los jamming the kick starter as follows:
1 Per Kick Starter is not on the stand
3 gears automatic clutch does not rotate crankshaft.
4. four feet contained in the clutch broke.
5. nail retaining the clutch broke.
Note:
Having the right crankcase (bag. Clutch) disassembled, check the main components and labor support kick starter. Components such as the inner clutch, roller clutch, the centrifugal clutch, automatic clutch canvas shoes, and canvas clutch.
The steps to fix it:
1 Drain the engine oil first.
Because we are going to dismantle the engine, drain the oil should be in advance through the exhaust hole in the bottom of the machine. If you want fast, look for containers such as trays wide and air volume. Open and direct clutch oil will go right out through the side.
2 Open the clutch located on the right side of the machine.
3 Check the damage.
4 Once the cause of the damage is known, solve the problem with the right steps.
if per detached, put it back in its holder.
if by broken, immediately replace and reattach
if the holder is broken, can be reproduced lathe turner / welder.
etc..
Images of Kick starter for V80:
